Aims

The aims of the course are to:

• cover the basic principles of practical design of typical engineering structures, with applications across a range of commonly-used structural materials.
• establish links between the theory of structures, taught in the Part I courses IA Structural Mechanics and IB Structures, and the properties of materials as covered in courses on Materials and Engineering Applications.
• study what differing approaches to design are appropriate for structures in different materials.
• develop a design methodology that provides a firm basis for the structures courses taught in Part IIA and for the more advanced courses in the fourth year.

Objectives

As specific objectives, by the end of the course students should be able to:

• have developed a good understanding of the structural forms appropriate in the various materials.
• be aware of the likely critical factors (requirements, properties, behaviour) for design in the different materials.
• be able to make sensible initial layout and sizing choices for simple structures in the various materials.
• be able to carry out design calculations for basic structural elements in the various materials.
• be aware of what design approaches will be appropriate, and what calculations necessary, for more complex structures in the various materials.
• appreciate the influence of risk, and variability of loading and material properties, on structural design and calculations.

Content

The implications of the general principles of structural mechanics – equilibrium, compatibility, constitutive laws, and stability – are investigated for different materials.  This leads to discussion of typical structural forms in the various materials, the reasons for adopting them, and appropriate methods of construction.   The significant types of structural behaviour, and therefore the most useful methods of analysis and calculation, are investigated for the different material types.   A basic aim is to establish means of making reasonable preliminary decisions about structural form and layout, and initial sizing of members, before detailed calculation need begin.

Design methodologies will be developed, and design of typical elements will be discussed, for the following materials:

• high-strength, ductile materials such as steel and aluminium alloys
• moderate-  to high-strength, anisotropic, brittle materials such as advanced composites and timber
• materials of low tensile but high compressive strength, such as concrete and masonry
• reinforced concrete where concrete is combined with a ductile tensile material
• brittle materials, such as glass

The critical modes of failure of structures made from these materials tend to differ – for example, global and local instability play a very significant role in thin-walled structures of high-strength materials, while shear-induced delamination is a major concern only in wood and composites. So design approaches will be correspondingly different.

Overview and principles (5L)

• Introduction to the course and overview of structural materials and implications of material properties for structural design
• Load paths and the application (and limitations) of the lowerbound theory in structural design
• Limit state design and consideration of material variability in achieving appropriate levels of reliability
• Resource efficiency and sustainability in structural design
• Form, forces and masonry - "I like an arch"

Ductile Metals (primarily steel) (3L)

Timber (3L)

Fibre Composites (1L)

Concrete and reinforced concrete (3L)

• Concrete and reinforced concrete
• Ultimate design for flexure, shear and compression
• Serviceability design and detailing

Glass (1L)

This syllabus contributes to the following areas of the UK-SPEC standard:

Toggle display of UK-SPEC areas.

 
Last modified: 02/10/2019 15:02